Skip to content

Geova Audit ​

Geova Audit looks for what is probably wrong in a layer, as a careful colleague would, and offers to fix it. It checks drawn, imported and Google Sheet layers in the background while the page is idle. A linked Mapplex layer is checked when you ask: see Linked Mapplex layers.

Where it shows ​

A layer with something to look at has a small amber count on its row: click it. You can also choose Audit this layer from the layer's ⋯ or from search (Ctrl K), or open the Audit tab of the side panel. After an import, a message says what the new layer has to look at, with Review.

What it looks for ​

In the order it matters:

  • The layer's place: a whole layer typed latitude first. Inside the layer nothing shows it, so Audit reads it against the map's other shown layers, linked Mapplex layers included: as it is, the layer lies away from them, and with latitude and longitude swapped it falls among them. A layer alone on its map, or a second place that no swap explains, is left alone.
  • The layer's coordinate system: a layer imported from projected numbers and read in the wrong system (a neighbouring zone, the other hemisphere, feet for metres). With the Audit tab open, Audit reads the layer's own numbers in the systems that would place them near the map's other layers, and names the one that fits. It is checked only for a layer that lies away from the others.
  • Places: latitude and longitude swapped, points at 0, 0, points far from the rest; and for lines and areas, a corner at 0, 0, typed latitude first, or far from its own shape.
  • Copies: the same shape with the same values more than once; different records on exactly one spot.
  • Shapes: areas that cross themselves, overlapping areas, shapes with no size, repeated corners, lines that run past a crossing or stop just short of another line of their layer.
  • Names: a point whose district, zone or village field names a different area from the one it lies in, when the map has a layer of those areas.
  • Values: one value written several ways (case, spacing, Arabic letter forms such as أ and ا, ة and ه, ى and ي, Arabic-Indic digits), likely misspellings of a common value, numbers stored as text, unusual numbers, stand-ins for blanks (-, N/A, ؟), hidden characters and extra spaces, and repeated IDs. Numbers typed as text are read as numbers, so an unusual one is found in a CSV too.
  • A field's habits: a code off its field's usual pattern (AB1007 among AB-1007), a blank where the field is almost always filled, a number missing from a numbering (P-137 between P-136 and P-138), a number typed with its unit (12 m), dates written in more than one way, and dates that are not real or far from the rest of their field. Audit learns each habit from the layer itself and needs almost every value behind it: a field written in two real ways, a field of names or a field left blank on purpose is left alone.

Each finding names its shapes as search does.

Fix, show, ignore ​

  • Fix: point at a fix to see it on the map first: red is what goes, teal is what it makes. A fix changes only what is still as it was found, and it is one Undo step. Swap them back moves each point and, for a layer imported from a spreadsheet or CSV, swaps its latitude and longitude cells too, while they still hold the point's position. Swap the layer back does the same for every shape of the layer. Repair the corners swaps back a corner typed latitude first and removes one at 0, 0; a corner that is only far away is shown, not changed. Fix the safe ones does spacing, hidden characters, repeated corners and numbers typed in a number field together.
  • Lines and overlapping areas: Trim them removes the short piece of a line past the line it crosses, and Extend them carries a line that stops short straight on to the line ahead; both do what the Trim and Extend tools do, for every line on the card at once. A line that runs on past a junction (a road past its last side street, a river past a tributary) or stops farther short than its last stretch, or than its layer's lines are usually drawn between corners, is not taken for a slip. A line is measured against the other lines of its own layer only: a ward boundary, a buffer or another layer shown on the map never makes a slip, and no street is cut at its edge. Remove the overlaps takes the ground two areas share out of one of them, and the other stays whole: the smaller one, unless you choose the other with Keep whole, or untick a pair to leave it alone. Two areas that are almost the same are shown and never cut.
  • Another coordinate system: Read it as that system reads every position of the layer again in the system named on the card, and the layer remembers it. It is offered only when the systems that fit agree to within 2 m, or only one of them has the datum you chose at import. When several fit and disagree, the card names them and changes nothing: import the file again with the right one.
  • Fixes that never guess: Use the usual format rewrites a code only when its letters and digits already fit and only a separator or capitals differ. Keep the numbers removes a unit only when every such value names the same one, so metres and kilometres are never mixed. Use one format rewrites dates only when the field itself shows whether the day or the month comes first. Blanks and missing numbers have no fix: Audit shows where they are.
  • Number fields: after Make them numbers or Keep the numbers, a field that holds only numbers becomes a number field, so you can edit it as one in the table and style by its values.
  • Choose: for one value written several ways, choose the spelling to keep. Untick a group to leave it alone.
  • Show lights the shapes in amber and moves the map to them. Select selects them for the editing tools, when you would rather repair a shape by hand: two overlapping areas are ready to merge or clip.
  • Ignore: the × on a row ignores that one item; Ignore on a card turns that check off for the layer. Both are saved with the map, never in a public link. Check them again brings everything back.

Health is the share of shapes with nothing to look at. If a check cannot cover the whole layer, Audit says Partial check and names what it could not finish.

Review one by one ​

A card lists its first items. To look at every item in turn, choose Review one by one: one card takes the place of the list and says where you are ("3 of 27"), and the map moves to each item as you come to it.

  • Fix this one fixes that item only, and the next one takes its place. Items only you can settle, such as a blank or a point far from the rest, have no fix: look, then go on.
  • Previous and Next step through the items; with the keyboard on Next, Enter walks the layer. The × ignores the item, and the arrow selects it for the editing tools.
  • Done returns to the list.

Linked Mapplex layers ​

A linked layer's records live in Mapplex, so Audit reads and checks them only when you ask. Open the layer's Audit tab and choose Check this layer: Audit reads every record of the layer from the workspace. You can Stop while it reads.

  • What you get: the same cards and health, with Show, Select for one record, and Review one by one. The tab says how many records were checked and when. Check again reads the layer again.
  • No fixes: correct the records in Mapplex. Nothing can be ignored, and the result is not saved with the map: it stays until you leave or reload the page.
  • Limits: a layer of more than 10,000 records is not checked yet. Photos and files are not checked. If some records could not be read, or records changed while the layer was read, Audit says Partial check. A collector's check covers the records assigned to them.

Google Sheet layers and roles ​

Google Sheet layers are corrected in the sheet: each finding lists its rows, with Copy row numbers. Viewers see what was found and can show and select it; owners, admins and editors fix and ignore.

Spatial intelligence. Clear next steps.